Multi-site network: all your sites on one private network
Branches, shops, warehouses, municipal buildings: we connect your sites on a single private network, using standard access links. You keep one point of contact, from the link to the router at each site.
A private network, over ordinary links
Each site is connected by the link available at its address. All these links arrive at the same network core, where your sites talk to each other without crossing the public Internet.
Your usual links
FTTH or FTTO fibre, xDSL, 4G/5G: the network relies on standard access links, chosen site by site according to availability and bandwidth needs.
Off the public Internet
Traffic between your sites travels over a private network. Your servers, tills or cameras are not exposed just to be reachable from one site to another.
A single Internet breakout
Internet access goes through the network core, behind a firewall: one security policy to maintain instead of one per site. The firewall at the core
Your VRB: the network stays under control
The VRB is the space from which your private network is managed. We run it for you, or alongside your IT team if you have one.
- Routing between sites and to the cloud
- Priority for sensitive traffic, such as telephony
- Network segmentation: office, tills, cameras, guest Wi-Fi
- Add a site without rebuilding what exists
One point of contact, from link to router
- Availability check for each address and choice of links
- Ordering, delivery follow-up and commissioning
- Routers delivered pre-configured, 4G/5G backup where needed
- Link monitoring and support when incidents occur
- Documented diagram and addressing plan, handed to your team
When does a multi-site network make sense?
- You have several branches, shops or depots sharing the same applications
- Your sites are linked by VPNs built up over time and hard to maintain
- Your MPLS contract is ending and you want to compare
- You open or close sites regularly
- You want data, telephony and cloud access on a single network
MPLS, SD-WAN or sdMPLS? The choice depends on your traffic and service commitments: how they differ. We tell you in writing which solution is used at each site and what the contract commits to.
From study to go-live
- 1. You send us the list of your sites, their addresses and your current contracts.
- 2. We check availability at each address and propose a costed architecture.
- 3. Sites are connected one by one, with no general outage: the old network stays live during the switchover.
- 4. We monitor the network and remain your point of contact for any change.
Several sites to connect?
Send us your list of addresses: we check each site’s availability and reply with a costed proposal.