Wi-Fi that holds up when everyone is connected.
Video calls freezing in the meeting room, the signal dropping at the far end of the floor, guests on the same network as accounting: these are the three complaints we hear most. None of them is fixed by adding an access point at random.
Why SME Wi-Fi disappoints
The problem is rarely the access point itself. It is almost always what surrounds it.
Access points placed by guesswork
An access point above the rack, where the cable happened to arrive, rather than where the users are. Load-bearing walls, glazing and metal ceilings do the rest.
Consumer equipment
An ISP router or a shop-bought repeater handles a few devices. Thirty people with a laptop and a phone each, plus guests, exceed what it was designed for.
Cabling and power
A modern access point is powered through its network cable. A damaged cable or an underpowered switch throttles throughput, or makes the access point reboot without anyone understanding why.
One network for everyone
Visitors, cameras, printers and workstations on the same network: the day one device is compromised, it can see everything else.
Measure before installing
- On-site survey. Floor plan, building materials, number of users and devices, uses (video calls, telephony, warehouse terminals). The survey decides how many access points you need, not a ratio per square metre.
- Cabling to every access point. Pulled and certified by our technicians, with a switch able to power them. A poorly cabled access point never reaches its rated performance.
- Installation and separate networks. Staff, guests, cameras and connected devices, telephony: each its own network, each its own rights.
- On-site check. We verify actual coverage, room by room, before we leave.
- Monitoring. An access point that goes down or saturates raises an alert on our side, not on the day someone complains.
Access points managed by the firewall
We install Fortinet FortiAP access points, managed directly from the FortiGate firewall. There is no separate Wi-Fi controller to buy or maintain: the wired network’s security rules apply to Wi-Fi as well.
If your firewall is another brand, or if your access points are recent and working, we do not replace everything: we start by fixing what is wrong.
- One console for the firewall, switches and access points
- Isolated guest network, with a welcome page if you wish
- Detection of unauthorised access points plugged into your network
- Seamless roaming between access points for calls and video
- Access point updates managed from the firewall, like everything else
Should you move to Wi-Fi 7?
Our straight answer: Wi-Fi 7 access points now cost what Wi-Fi 6 ones did yesterday, but their real gains depend on the 6 GHz band and more power. The cost often sits behind the access point: switches and cabling. If you are replacing your Wi-Fi now, we plan for it; otherwise, a well-installed Wi-Fi 6 beats a badly placed Wi-Fi 7. Details in our article Wi-Fi 7 en entreprise (in French).
A shop? See also retail IT. Cabling is covered on our certified structured cabling page.
Does your Wi-Fi drop out in meetings?
We survey your premises and tell you what is wrong before proposing anything.